High quality 6mm ID pillow block for small robotics.
Use these for any project requiring a 6mm OD rotational shaft.
Sold in single units.

External Motor Shaft for adding USDigital Encoder!
Voltage = 7.2vdc
RPM = 175
Reduction = 50:1
Stall Torque = 99.04 oz-in (7.1 kg-cm)
Outside Diameter = 37mm

High quality mounting hub.
Works with any motor with a 6mm shaft.
Aluminium, with screws
Pair

High quality brushed aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories
Length: 7"

High quality black aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories.
Length: 4"

This is the best servo controller value available.
32 channels of 1uS resolution servo control.
12 Servo Hexapod Gait Sequencer built in.
Compatible with Microsoft Robotics Studio

• Upgrade the 422 (57oz.in.) to 485 (80oz.in.) servos!
• Give your BRAT increased strength.
• Requires the purchase of a BRAT kit.

High quality brushed aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories.
Length: 13"

High quality brushed aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories.
Length: 16"

These steel music wire extension springs are perfectly suited to load balance joints made with the brackets. They are 1.5" total length and have a Load Lbs rating of 1.58 lbs.

This 6.0vdc Ni-MH 1600mAh battery pack is perfect for small robots.
Half the weight of an equal capacity Ni-Cad pack.
Tamiya connector

This 6.0vdc Ni-MH 2800mAh battery pack is perfect for small robots.
High charge/discharge capable
Tamiya Connector

These useful snap rivet fasteners make mounting servos simple. The fasteners fit all size servos.
Qty = 25
Weight = .0074 oz.

High quality black aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories.
Length: 3"

Adapter from MXL Pulley to SES
connects the Lynxmotion mechanical Kit to MXL
Aluminum, 1 pce.
with 4 screws

Easily extend the distance a servo can be from the control electronics.
Works with RC receivers or servo controllers.

• Powerful Bot; prewritten programs available
• This product includes everything you need to build a robot to control using the Bot Board/SSC-32/BAP28 and the PS2 robot controller.
• This kit includes brushed BODY AND BRACKETS.

Hexapod foot sensor pair. Includes two sensors, hexapod foot caps, rubber bumpers, and hubs.
Does not include tubing, wires, heatshrink, or wire ties.
Compatible with the AH3-R and 3DOFA legs (BRU/BLK).
Fits to other legs with some adjustments

This clip snaps onto a standard 9V battery. Comes with 15cm cable. Solid plastic housing.

High quality brushed aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories
Length: 12"

High quality brushed aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories
Length: 6"

High quality injection molded hinges attach to the bottom of a servo directly inline with the output shaft.
Sold in a 2-pack.
Fits standard size servos.
Used with ASB-03 and ASB-05 only.

High quality black anodized aluminum multi-purpose servo bracket. (2x)

• Robot chassis and 6 * HS-422 servos only; no controller.
• Black look
• The biped legs feature 3 degrees of freedom.
• This product includes everything you need to build a robot to control with your servo controller.

• Robot ready to walk with obstacle detection
• 13 servos
  
• Servo Controlller and Atom Bot Board
• preprogrammed motions
• Motion editing software SEQ-01 and Sensor Software
• The biped legs feature 6 degrees of freedom.

Rotating base provides the ultimate in strength and rigidity.
All metal construction.
The top Servo Bracket allows two servos to be combined for double the strength.
The base supports the SSC-32 and Bot Board
Servos are not included.

• Robot chassis only; no servos or electronics.
• The biped legs feature 6 degrees of freedom.
• This product includes everything you need to build a robot to control using your servos and electronics.

• Robot chassis and HS-5485 servos, no controller
• The biped legs feature 6 degrees of freedom.
• This product includes everything you need to build a robot to control using your electronics.

• Serial port-based version with powerful PC software.
• This product includes everything you need to build and control the robot from a personal computer.

• Powerful ServoPod; prewritten programs
• This product includes everything you need to build a robot to control using the Bot Board/SSC-32/BAP28 and the PS2 robot controller.
• This kit includes black anodized brackets.

This mechanical dampener will smooth out joint movements
prevents oscillations with the large servo brackets.
Brackets and servos not included.

This chassis is used in Lynxmotions T-Hex robots.
Black anodized Aluminium
(available brushed silver on request)
with 6 ball bearings for the legs

• Autonomous version of biped BRAT (black)
• This product includes everything you need to build the autonomous robot
• batteries and sensors not included.

This dual expansion deck has a servo mounting hole centered on the top panel.
This allows mounting dual ultrasonic sensors for 360° coverage.
Note, one standard size servo required.

Is designed for Lynxmotion motors with secondary axis (GHM-03, GHM-04 and GHM-16)
Encoder = 100 cycles per revolution
Encoder = 400 quadrature counts per revolution
Frequency = up to 30khz

Very handy servo driver
operates your servo or like device quickly and easily
Useful for aligning servos without needing to write a program.

Diameter = 2.63"
Width = 0.35"
Motors = Any Hitec standard servo spline
2 wheels and 2 rubber per pack

Sticky Servo Tire rubber for SRVT-01 Tires
for excellent traction
2 pcs per pack

High quality injection molded hinges attach to the bottom of an HS-81 or HS-85 servo directly inline with the output shaft.
Sold in a 2-pack. Fits micro size servos only.

Aluminum Spacer 1.0" (2 pcs)
SES compatible
9 screws included

low cost vacuum gripper kit for AL5 Arms or other
can rotate the object
complete with servos
 

Lexan mounting plate and hardware.
Mounts a Little Grip kit to an aluminum servo "C" bracket.

High quality black anodized brushed aluminum bracket makes easy work of mounting any of the popular sensors. The universal mounting holes allow attaching the SRF-04, SRF-05, SRF-08 or the Sharp GP2 series of IR sensors to a servo. Bracket can also be used to static mount the sensors to a robot body. Includes hardware to mount a single sensor to the bracket, and to mount the bracket to a servo.

The best carrier board for the Basic Atom, or any other 24 or 28 pin microcontrollers.
Oboard speaker, three buttons, LED's, a Sony PS2 controller port.
Up to 20 servos can be plugged in directly.

High quality black multi-purpose servo bracket
anodized aluminum
for Hitec Standard Size Servos
2 pcs. with screws

RIOS (Robotic arm Interactive Operating System) is a Windows 95/98SE/2000/XP program for controlling the L5 and L6 Robotic Arms with the SSC-32. With RIOS, your robot can be taught sequences of motion via the mouse or joystick. This extremely powerful program uses external inputs to affect the robot's motion for closed loop projects. External outputs can also be controlled.

Lynxmotion Visual Sequencer is a Windows XP program
for controlling anything you build using up to 32 servos using the SSC-32.
Visual representation of the robot. Lots of other features.
Generates Basic Atom and Basic Stamp 2 code as well.

Easily add waist rotate to a biped, a sixth DOF to a Biped leg, or wrist rotate
to a robotic arm. This part makes many interesting and unusual mechanical
assemblies possible.

High quality black anodized dual inline multi-purpose servo bracket.

High quality black multi-purpose servo bracket
anodized aluminum
for Hitec Standard Size Servos
2 pcs. with screws
Inline Version of ASB-24

High quality black anodized aluminum servo offset axis bracket.

High quality black anodized aluminum servo offset axis bracket.

High quality brushed aluminum special servo bracket.

• Powerful Bot; prewritten programs available
• This product includes everything you need to build a robot to control using the Bot Board/SSC-32/BAP28 and the PS2 robot controller.
• This kit includes BLACK BODY AND BLACK BRACKETS.

High quality, black anodized aluminum long "C" bracket
Useful for making your own arms and legs.
Sold in a 2-pack.
Fits Quarter Scale (GIANT) size servos.

Voltage = 12vdc
RPM = 64
Reduction = 1:231
Outside Diameter = 22mm
Stall Torque = 24kg-cm
4mm axis

External 6mm Motor Shaft for adding USDigital Encoder!
Voltage = 12vdc
RPM = 200
Reduction = 30:1
Stall Torque = 55.6 oz-in (4 kg-cm)
Outside Diameter = 37m

These heavy duty wires are perfect for the:
Lynxmotion GHM-01 thru GHM-13 motors
Lynxmotion PGHM-01 thru PGHM-03 motors.
The stake-on ends push onto the motor terminals,
and the other end is stripped but not tinned for screw terminal use.
Length: 33cm

With two analog joysticks and 16 buttons it makes a great robot controller.
The cable set makes it easy to connect the game controller to your favorite microcontroller.

Motor mount, compatible with the Servo Erector Set components.
High quality black anodized aluminum.
Heavy duty .125" stock.
Works with Motors GHM-01 to 04, 12, 13, 16, plus the PGHM-01 thru PGHM-03 motors.
two mounts per package

switchable powere line for 9V block batteries
one end with battery connect mates standard 9VDC battery
the other end is stripped, but not tinned for screw terminal use
a switch is located between the ends to switch on/off

• Upgrade the 422 (57oz.in.) to 645 (133oz.in.) servos!
• Give your BRAT superior strength.
• Requires the purchase of a BRAT kit.

High quality black multi-purpose servo bracket
anodized aluminum, with SES hole pattern on side and back
for Hitec Standard Size Servos
2 pcs. with screws
Inline version

These aluminum brackets are designed to connect two Multi-Purpose servo brackets.
Can be mounted ontop of servo hones as well.
Aluminum, black
Sold in a 2-pack.

High quality, black anodized aluminum "C" bracket
Fits standard size servos.
2 Ball bearings included
Aluminium, black.
Sold in a 2-pack

Pan and Tilt assembly for horizontal surface mount.
Made using two Lynxmotion servo brackets.
Simple version without ball bearings
Perfect for your small remote piloted robot!
available with or without servos

High quality, black anodized aluminum "C" bracket
Fits standard size servos.
no ball bearings included
Aluminium, black.
Sold in a 2-pack

High quality, brushed aluminum "C" bracket
Fits standard size servos.
2 Ball bearings included
Aluminium, brushed
Sold in a 2-pack

Powerful Bot; prewritten programs available
Kit, needs assembly, with 18 metal gear servos HS-645MG
autonomous or remote control with optional PS2 robot controller.
This kit includes black body and black brackets.

• Powerful Bot; prewritten programs available
• This product includes everything you need to build a robot to control using the Bot Board/SSC-32/BAP28 and the PS2 robot controller.
• This kit includes black anodized brackets.

• Robot chassis
• 12 * Hitec HS-5645 servos
• no electronics.
• The biped legs feature 6 degrees of freedom.
• This product includes everything you need to build a robot to control using your electronics.

High quality, black anodized aluminum long "C" bracket works great with our Multi-Purpose Servo Bracket or Heavy Duty Servo Hinge sold separately.
Useful for making your own arms and legs.
With ball bearings.
Sold in a 2-pack.
Fits standard size servos.

High quality, black anodized aluminum multi purpose bracket
Useful for making your own arms and legs.
Sold in a 2-pack.
Fits Quarter Scale size servos.

High quality, black anodized aluminum offset "C" bracket
with ball bearings
Sold in a 2-pack.
Fits standard size servos.

High quality black anodized aluminum "Passive Hinge" bracket with ball bearings
Useful for making parallelogram joints, or indirect drive joints with a mechanical advantage.
Sold individually.

High quality brushed aluminum dual servo bracket.
Used where you need to double the servos on a single axis for increased strength.
Works great for the shoulder of a robot arm.
Sold in a single pack.
Fits standard size servos.
Requires an ASB-09 or ASB-10 to connect to the servo horns.

High quality black anodized aluminum dual servo bracket.
Used where you need to double the servos on a single axis for increased strength.
Works great for the shoulder of a robot arm.
Sold in a single pack.
Fits standard size servos.
Requires an ASB-09 or ASB-10 to connect to the servo horns.

Aluminium ball bearing hub kit
Lynxmotion SES tapped hole pattern

These parts mate to the HUB-09 and the BBH-01.
When used with these parts a light but very strong tubing pivot can be made.
They can also be used to make a heavy duty servo horn adaptor.

These aluminum robot feet measure 2.50" x 4.75".
They have a bend on the long dimension for added strength, and some holes to lighten the foot.
They will work perfectly for a humanoid biped design.

These black anodized aluminum robot feet measure 3.00" x 5.00".
They have a bend on the long dimension for added strength, and some holes to lighten the foot.
They were designed specifically for the reverse knee leg design, but will work perfectly for a humanoid biped design as well.

High quality black anodized brushed aluminum brackets make easy work of mounting standard size servos.
Sold in a 2-pack.

This 2.4ghz wireless Play Station 2 style controller works perfectly with any of our Bot Board / Basic Atom 28 equipped robots.
Up to four of them can be used at the same time.
They have a range of 10 meters, more when used outdoors.
Two analog joysticks and 16 buttons available for robot control.
Dual vibration motors provide tactile feedback for robots programmed with obstacle sensors.

Rad Achsadapter
Kräftiges Design
Passt an jeden Motor/Achse mit 4mm Achsendurchmesser
Aluminium, komplett mit Schrauben
2 Stück

High quality anodized aluminum hub allows the aluminum tubing sections (AT-01 thru AT-06) to be connected to our servo brackets.

These hubs can be used with the ASB-19 and BBH-01 to make a lightweight but very strong tubing pivot.

Inside Diameter: .500"
Height: 1.50"
Sold in pairs.
Can be used with our aluminum tubing. (AT-01 through AT-06)

High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08.
Single pack.

High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08.
Single pack.

High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08.
Single pack.

High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08.
Single pack.

High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08.
Single pack.

High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08.
Single pack.

These heavy duty wiring harnesses are perfect for your small stationary robot.
The 5.5mm x 2.1mm connector mates to our 6vdc 2amp wall packs, and the other end is stripped, but not tinned for screw terminal use.

Tamiya Connector, mates to battery pack
red / black cable pair, open ended
length: 8"
Cable diameter: 2.6mm
Wire diameter: 1mm
 

Steel 1/4"
10 pcs.
Lynxmotion Servo Erector Kit compatible

This is a compact electronics carrier made for the servo erector set.
It has holes with the erector set pattern, and holes for ASB-02s mounted with rivet fasteners.
Either a single board or two boards can be mounted.
Fits for SSC-32 and Atom Bot Board

Quadrapod body kit
fits to all SES Legs
fits to SSC-32 and Bot Board
black Lexan
4 ball bearings included

These laser-cut Lexan panels and nylon standoffs make a great Biped Torso for use with the aluminum servo brackets (not included).
It has mounting hardware to hold a Bot Board, SSC-32, or a ServoPod microcontroller.
Used for the Biped Scout project.

Obstacle avoidance kit for BRAT
can look to left and right
no GP2D12 SHARP sensor included
Servo included

High quality mounting hub.
Works with any motor with a 6mm shaft.
Aluminum, with screws
Pair

High quality mounting hub.
Works with any motor with a 4mm shaft.
Aluminum, with screws
Pair

High quality heavy duty injection molded hinges
attach to the bottom of a servo directly inline with the output shaft.
Sold in a 2-pack.
Fits standard size servos.
Used with ASB-03 and ASB-05 only.

These black laser-cut Lexan parts and nylon standoffs make a nice Biped hand.
The parts can make either a left or right hand.
The servos are not included.
It can be used for a Humanoid Biped, or any project that needs to get a grip.

Light weight wrist rotate upgrade kit for the Lynxmotion Arms (AL5x).
noDNA Premium Kit includes 1 x HS-85MG (metal gear)

Hexapod kit using the Bot Board/SSC-32/BAP28 processor
Can be controlled by a PS2 Controller (not included).
This kit includes black brackets.
12 servos included

Hexapod kit using the Bot Board/SSC-32/BAP28 processor
Can be controlled by a PS2 Controller (not included).
This kit includes brushed brackets.
12 servos included

Steel 5/8" 4-40
black, socket head
3/32" nut driver
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel 3/8"
silver, phillips
length: 12.3mm, length with head: 14.4mm
10 pcs.
Lynxmotion Servo Erector Kit compatible

Hex Standoffs male/female
Nylon, black
length: 9.6mm, total length: 14.3mm
10 pcs.

Hex Standoffs female/female
Nylon, black
length: 9.6mm
10 pcs.

Hex Standoffs female/female
length: 19.3mm, total length: 24mm
Nylon, black
10 pcs.

Steel 1/2"
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel 5/8"
silver, phillips
length: 15.3mm, length with head: 17.3mm
10 pcs.
Lynxmotion Servo Erector Kit compatible

black Nylon Washers 4-40
10 pcs.
Lynxmotion Servo Erector Kit compatible

black Nylon nuts 4-40
10 pcs.
Lynxmotion Servo Erector Kit compatible

black Nylon Acorn nuts 4-40
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel 1/2" x 4
silver
10 pcs.

Steel 1/4"
10 pcs.
These self-tap into Hitec servo horns perfectly.
Lynxmotion Servo Erector Kit compatible

Steel 3/8" x 4
silver
length 11.5mm
10 pcs.

Voltage = 12vdc
RPM = 120
Reduction = 50:1
Stall Torque = 123.20 oz-in (8.8 kg-cm)
Outside Diameter = 37mm

Inside Diameter = 3mm
Outside Diameter = 8mm
Thickness = 4mm
2 pcs.

High quality 4mm ID pillow block for small robotics.
Use these for any project requiring a 4mm OD rotational shaft.
Sold in single units.

high quality aluminum servo disc
standard Servo Erector Set hole pattern
tapped to accept 2-56 screws
fits on all Hitec gears

High quality, black anodized aluminum long "C" bracket works great with our Multi-Purpose Servo Bracket or Heavy Duty Servo Hinge sold separately.
Useful for making your own arms and legs.
Sold in a 2-pack.
Fits standard size servos.

Included in the black or silver Phoenix kit are:
aluminum body and leg panels and brackets
standoffs, hardware, rubber end caps, a wiring harness
This basic kit does NOT include:
Electronics, Battery, Servos

The new cool T-HEX Kit from Lynxmotion
comes with 18* HS-645MG Servos
with SSC-32 servocontroller
with ABB-01 and Atom Pro Processor
configured for wireless gamepad control
free software

2 axis 2g accelerometer with analog outputs.
Features integrated op amp buffers

• This is the new, larger V2 A4WD RC-vehicle kit
• Classic 4WD differential drive system
• Motor Controller
• Hitec 6ch RC
• Heavy duty aluminum structural components
• Precision laser-cut lexan panels

• This is the new, larger V2 basic kit without controller
• Classic 4WD differential drive system
• Heavy duty aluminum structural components
• Precision laser-cut lexan panels

• A complete autonomous vehicle kit
• Classic 4WD differential drive system
• Motor Controller
• Microcontroller
• Sensors
• Heavy duty aluminum structural components
• Precision laser-cut lexan panels

• A complete RC-vehicle kit
• Classic 4WD differential drive system
• Motor Controller
• PS2 Controller
• Heavy duty aluminum structural components
• Precision laser-cut lexan panels

Two DOF mini arm with Gripper for vertical surface mount.
Made using Lynxmotion servo brackets.
Perfect for your small remote piloted robot!
Includes brackets, hardware and servos.

These Chassis Brackets are used in the HBK-03 chassis for the front and rear panels.
Made of black anodized aluminium.
They can be used in place of the hex standoffs to add side panels.
Up to two pairs of Chassis Brackets can be used.
Using the ACB-02 you can mount a servo inside the bracket, i.e. for head or tail

These Chassis Brackets are used in the HBK-03 chassis for the front and rear panels.
Made of black anodized aluminium.
They can be used in place of the hex standoffs to add side panels.
Up to two pairs of Chassis Brackets can be used.

Rugged 4WD Sumo Rolling Chassis
Bullet Proof Laser-cut Lexan
Aluminum Reinforced Chassis Design

Affordable 2WD Sumo Rolling Chassis
Bullet Proof Laser-cut Lexan
Aluminum Reinforced Chassis Design

Powerful 6WD Sumo Rolling Chassis
Bullet Proof Laser-cut Lexan
Aluminum Reinforced Chassis Design

Extreme 6WD Sumo Rolling Chassis
Bullet Proof Laser-cut Lexan
Aluminum Reinforced Chassis Design

This combo kit is for autonomous operation
Powerful 6WD differential drive system
Precision laser cut components

This combo kit is for autonomous operation
Fast 2WD differential drive system
Precision laser cut components

This is the basic kit without electronics
Popular triangular track differential drive system
Precision laser-cut components

This is the famous Johnny 5 kit with electronics
Popular triangular track differential drive system
Articulated Robot
eyes and batteries not included

This is the Johnny 5 torso kit with servos
Articulated Robot
tracked vehicle, eyes and batteries not included

This is the combo kit with wireless PS2 gamepad control
Popular triangular track differential drive system
Precision laser-cut components

Works with our Universal 6mm Hub HUB-02 and 4mm Hub HUB-03.
Sprocket diameter with tracks is 3.75"
Pitch diameter (calculated, not measured) 3.13"
Designed to be used back to back for a dual sprocket config
Comes as Pair

Rugged polypropylene links.
Rubber has a Shore A hardness of 45.
These links require some assembly.
21 links total

Biggest aluminium Lynxmotion Robotic Arm Kit
for serial connection to your PC
free software included, selectable software options
Latest Verson with HS-805BB in shoulder

Aluminium Lynxmotion Robotic Arm Kit
optional with standard servos
optional with premium servos
optional controller and software

Hex Standoffs female/female, tapped
length: 38mm
Aluminium
10 pcs.

10 pcs.
Nylon, white
Diameter: 12.6mm
Length: 33mm
Hole diameter: 7.8mm

Heavy duty wrist rotate upgrade kit for the Lynxmotion Arms (AL5x).
Includes 1 x Hitec HS-485HB servo.
Adds 0.5" to length/reach of arm.
Gripper is not included (comes with arms)

High quality black anodized aluminum "C" micro-scale servo bracket.
fits micro size Hitec HS-85BB and MG servos
Two pack

Add-on Base Rotate Kit , assembly required
can support a good weight
Strong ABS plastic.
Please note: different versions available, with or without servo
uses Hitec standard size servos only

Twice as long and as strong as SPR-01

Rotation Bracket, fits standard size for up/down
and micro size for rotation
Single pack

Multi-Purpose Micro Servo Bracket
fits micro size Hitec HS-82 and HS-85 servos only
Two pack

High quality black anodized aluminum long "C" micro-scale servo bracket.
fits standard micro size Hitec servos
Two pack

This cable is used to connect power to a peripheral device.
It can be used for any 0.1" spaced header such as the Bot Board.
The cable is one pair, red and black.
Both headers are female
Length: 8"

Hex Standoffs female/female
length: 19.3mm
Nylon, black
10 pcs.

Steel 1/4"
10 pcs.
Lynxmotion Servo Erector Kit compatible

3DOF leg design for polypods
Aluminium, black anodized
joints with ball bearings
2 legs included in each kit

3DOF leg design for polypods
Aluminium, brushed
joints with ball bearings
2 legs included in each kit

3DOF leg design for polypods
Aluminium and Lexan, both black
joints with ball bearings
2 legs included in each kit

3DOF leg design for polypods
Aluminium and Lexan, black and brushed
joints with ball bearings
2 legs included in each kit

3DOF leg design for polypods
Aluminium and Lexan, both black
joints with ball bearings
2 legs included in each kit

3DOF leg design for polypods
Aluminium and Lexan, black and brushed
joints with ball bearings
2 legs included in each kit

This chassis is used in the BH3 robot.
All black-anodized aluminum panels, brackets, and standoffs
For use with the 3DOF "B" or "C" legs.

The new cool T-HEX Kit from Lynxmotion with 4DOF legs!
comes with 24* HS-645MG Servos
with SSC-32 servocontroller
with ABB-01 and Atom Pro Processor
configured for wireless gamepad control
free software

Complete black or silver Phoenix kit
for autonomous behavior and serial programming
With Servo Controller, Microcontroller PS2 Gamepad Adapter, serial cable
free Software downloadable

3DOF leg design for the T-HEX and polypods
black anodized Aluminium
joints with ball bearings
2 legs included in each kit

High quality, black anodized aluminum short "C" bracket
Useful for making your own arms and legs.
Sold in a 2-pack.
Fits Quarter Scale (GIANT) size servos.

Steel
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel
10 pcs. with Nylon insert lock
Lynxmotion Servo Erector Kit compatible

Hexapod Round Body Kit
Aluminium, brushed
ball bearings for leg attachment

Hexapod Round Body Kit
Aluminium, black
ball bearings for leg attachment

These heavy duty wiring harnesses are perfect for your small robot.
The quick connect end (Tamiya standard) mates to our NiMH battery packs, and the other end is stripped, but not tinned for screw terminal use.

Powerful Bot; prewritten programs available
Kit, needs assembly, with 18 metal gear servos HS-645MG
autonomous or remote control with optional PS2 robot controller.
This kit includes brushed body and brushed brackets.

Voltage = 12vdc
RPM = 14
Reduction = 410:1
Outside Diameter = 35mm
Stall Torque = 36kg-cm
6mm axis

Servo Tubing Adaptor
Fits on standard Hitec Servos
All Lynxmotion tubes (AT-01 to AT-06) can be fitted
2 pcs per pack

Steel 0.375" 4-40
black, socket head
3/32" nut driver
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel 3/8" 4-40
black, socket head
3/32" nut driver
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel 1/4" 4-40
black, socket head
3/32" nut driver
10 pcs.
Lynxmotion Servo Erector Kit compatible

Steel 3/4" 4-40
black, socket head
3/32" nut driver
10 pcs.
Lynxmotion Servo Erector Kit compatible

High quality RC Truck 12mm hex mounting tire hub.
Works with any motor with a 6mm shaft.
Aluminium, with screws
Pair

Hex Standoffs female/female
length: 25mm (1")
Nylon, black
10 pcs.

This cable is used to connect power to a peripheral device.
It can be used i.e. to connect an SSC-32 controller to a Bot Board.
The cable is one pair, yellow and black.
Both headers are female, one is 3 pins the other 2 pins
Length: 8"

With two analog joysticks and 16 buttons it makes a great robot controller. The cable makes it easy to connect the game controller to your favorite microcontroller.

Machined aluminum robot wheels. (2pcs)
Hole pattern compatible with Lynxmotion SES products
compatible with Lynxmotion motor hubs
Diameter of 2.75" and width of 0.27".

High quality brushed aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories.
Length: 3"

High quality black aluminum multi-purpose "U" channel.
Works great for making larger assemblies.
Connect any of the Servo Erector Set brackets, hubs, and accessories.
Length: 5"

Steel 1/2"
silver, phillips
length: 12.3mm, length with head: 14.4mm
10 pcs.
Lynxmotion Servo Erector Kit compatible

This laser-cut Lexan panel can easily be attached to a Hexapod or Quadrapod robot chassis made from aluminum tubing.
It has mounting hardware to hold a Bot Board and SSC-32, or a ServoPod, or OOPic-R microcontroller.
The underside has precut holes to make mounting a battery pack easy using tie-wraps.

stylish, black aluminium leg kit (pair)
servos not included

High quality heavy duty injection molded hinges
attach to the bottom of a servo directly inline with the output shaft.
Sold in a 2-pack.
Fits standard size servos.
For Ball Bearings (not included)
Used with ASB-03 and ASB-05 only.

Inside Diameter: .250"
Height: 1.25"
Sold in pairs.
Can be used for feet or fingers

These aluminum brackets are designed to connect two servo brackets.
Can be mounted ontop of servo hones as well.
Aluminium, black.
Sold in a 2-pack

These aluminum brackets are designed to connect two servo brackets.
Can be mounted ontop of servo hones as well.
Aluminium, black.
Sold in a 2-pack

Aluminum Spacer 1/4" (2 pcs)
SES compatible
9 screws included

Pan and Tilt assembly for horizontal surface mount.
Made using two Lynxmotion servo brackets.
special noDNA version with ball bearing
Perfect for your small remote piloted robot!
available with or without servos

Rotating base provides the ultimate in strength and rigidity.
All metal construction.
The top Servo Bracket allows two servos to be combined for double the strength.
The base supports the SSC-32 and Bot Board
Premium kit with HS-5645MG digital servo.

LED bar disülay for Voltage measurement
Voltage ranges 0VDC to: 4.8, 6.0, 7.2, 8.4 VDC
Plug and Play

Rugged polypropylene links.
Rubber on the outside for better traction
21 links total, can be connected individually
55cm total lenght if all segments used, 3" wide (7.4cm)

robust 3 axis Joystick gimbal with high sensitivity
All axis will return to neutral when released
push button on the top of the stick

Base Rotate Kit , assembly required
can support 10lbs of weight
is injection molded from ultra strong ABS plastic.
Please note: different versions available, with or without servo
uses Hitec standard size servos only

complete low cost vacuum gripper kit for AL5 Arms
 

Compact electronics carrier
Either a single board or two boards can be mounted.
Fits for SSC-32 and Atom Bot Board
Includes the DC power jack with cable and two switches
no soldering required

High quality universal hub.
Works with any motor with a 1/8"mm shaft.
Aluminium
Pair

High quality 3mm ID pillow block for small robotics.
Use these for any project requiring a 3mm OD rotational shaft.
Sold in single units.

These aluminum brackets are designed to connect two servo brackets.
Can be mounted ontop of servo hones as well.
Aluminum, black
Sold in a 2-pack.

These aluminum brackets are designed to connect two servo brackets.
Can be mounted ontop of servo hones as well.
Aluminum, black
Sold in a 2-pack.

Low Profile Axis Gear Set (Hitec)

2DOF Leg (pair)
brushed aluminum
no servos included

Mini Hedxapod Body Kit
made of Lexan
with 6 ball bearings for the legs
Legs should be 2DOF or 3DOF by Lynxmotion

A-Pod Hexapod, Kit to assemble
with Servo controller, Microcontroller
ready for optional wireless PS2 Gamepad control
with or without 25 metal gear servos

Used to attach an MXL Timing Belt to a Hitec servo.
For gear reduction, linear actuation, load sharing, and much more
MXL (Miniature Extra Light) Pitch is 0.08".
Pitch diameter is 0.815".
Overall diameter is 1.0".
Belt thickness of 1/8", 3/16", and 1/4" will work
Fits standard Hitec servos

Rad Achsadapter
Kräftiges Design
Passt an jeden Motor/Achse mit 3mm Achsendurchmesser
Aluminium, komplett mit Schrauben
2 Stück

Biped Torso Kit aus Lexan mit Aufhängung für Servo Controller SSC-32 oder Bot Board ABB-01 Kann 5 Servos aufnehmen

Small IR Sensor
reflective, for line detection
5VDC
1/8" to 1/2" range
Digital High/Low output

This cable makes it easy to use the Sharp GP2D12x Infrared Sensor.
Fits also for Devantech SRF-01 Ultrasonic Sensor (DEV-SRF01)
22cm with 3pin header socket

Aluminum mega-scale servo bracket
blackl anodized
Sold in a 2-pack
Fits HS-805BB and HS-805MG servos.

Black anodized long "C" mega-scale servo bracket.
Sold in a 2-pack
Fits HS-805BB and HS-805MG servos
NOT compatible with HMSH-02 metal servo horns