Actuonix L12-50-210-12-S Micro linear actuator Linear servo actuator with limit switches Limit switches, actuator stroke 50mm, transmission ratio 210:1, max. voltage 12 Volt

SKU: L12-50-210-12-S

GTIN: 4251326827734

Category: Actuators & Servos

Available immediately
Delivery time: 6 - 7 Workdays (DE - int. shipments may differ)

136,00 €

incl. 19% VAT , (Standard)

Simple DC motor control. Limit switches automatically stop the motor when the end of the stroke is reached.

Stroke
Ratio
Max. Voltage

Actuonix L12-50-210-12-S Linear Actuator with Limit Switches

The L12-S series represents a reliable range of micro linear actuators that are ideal for cost-effective applications. The L12-S is equipped with limit switches that automatically shut off the motor when the end of the stroke is exceeded (by 1mm). Internal diodes allow the actuator to reverse direction and move away from the limit switch. These limit switches are pre-set at the factory and cannot be adjusted.

The S series offers an easy-to-use solution: simply apply voltage, and the actuator extends; reverse the polarity, and it retracts. Control can be done manually via a DPDT switch, wirelessly via the Linear Actuator Controller, or with an H-bridge circuit. The LAC control board cannot be used with these actuators.

Weighing only 28g to 56g, depending on the selected stroke length, and with its compact design, the L12-S is perfect for robotics applications and other projects with limited space and weight requirements.

Industries where the L12-S actuator is used:

Medical devices
Aerospace
Simulation
Commercial transport

The L12-S series offers 24 models with the following specifications:

Stroke lengths: 10mm, 30mm, 50mm, 100mm
Gear options: Forces ranging from 22N (5lbs) to 80N (18lbs) and speeds from 6.5mm/s to 25mm/s
Available in either 6V or 12V versions

Need more power? Check out the more powerful L16-S micro linear actuators.

All our linear actuators come with a mounting kit to simplify installation.

Product Specifications:

Retracting force (N): 45
Closed length from hole to hole (mm): 102
Control: S
Gear ratio: 210
Lifetime: Standard
Maximum load (N): 80
Model: L12
Speed without load (mm/s): 6.5
Peak efficiency at load (N): 36
Stroke length (mm): 50
Voltage (VDC): 12
Weight (g): 40

Gearbox Option	50:1	100:1	210:1
Peak Power Point	17N @ 14 mm/s	31N @ 7 mm/s	62N @ 3.2 mm/s
Peak Efficiency	10N @ 19 mm/s	17N @ 10 mm/s	36N @ 4.5 mm/s
Maximum Speed (No Load)	25 mm/s	13 mm/s	6.5 mm/s
Maximum Lifting Force	22N	42N	80N
Back Drive Force (Static)	12N	22N	45N

Stroke Option	10 mm	30 mm	50 mm	100 mm
Weight	28 g	34 g	40 g	56 g
Repeatability (-L, -R, -P & LAC)	± 0.1 mm	± 0.2 mm	± 0.3 mm	± 0.5 mm
Maximum Side Load (Extended)	50N	40N	30N	15N
Closed Length (Hole to Hole)	62 mm	82 mm	102 mm	152 mm
Potentiometer (-L, -R, -P)	1kΩ ± 50%	3kΩ ± 50%	6kΩ ± 50%	11kΩ ± 50%

Voltage Option	6VDC	12VDC
Max. Input Voltage	7.5V	13.5V
Standby Current	460 mA	246 mA
Idle Current (-L / -R)	7.2 mA	3.3 mA

Property	Value
Operating Temperature	-10°C to +50°C
Potentiometer Linearity	Less than 2.00%
Max. Duty Cycle	20%
Audible Noise	55dB @ 45 cm
Ingress Protection	IP-54
Mechanical Play	0.2 mm
End Switch (-S)	Max. Current Leakage: 8uA
Maximum Static Force	200N