PQ12-S Micro Linear Drive with Limit Switches
The smallest linear actuator from Actuonix
If you need a small linear actuator for your next project, the PQ12-S is for you. The PQ12-S is equipped with limit switches that cut power to the motor when the actuator reaches 1 mm before the end of its stroke. Internal diodes allow the actuator to reverse away from the limit switch. The limit switches cannot be moved.
As long as voltage is applied to the motor terminals (2 & 3), the actuator will extend. If the polarity is reversed, the actuator will retract. This can be done manually with a DPDT switch (latching or momentary), wireless control, relay or with an H-bridge circuit.
"S" series actuators are NOT compatible with the linear actuator control Card.
The PQ12 is an incredibly small linear actuator weighing just 15g. Its tiny size makes it an ideal device for applications in robotics, medical and aerospace industries, and for hobbyists. Wherever weight and size requirements demand a tiny, lightweight device, the PQ12 is a good choice.
The PQ12-S is available in 6 unique models that feature
All linear actuators are supplied with a mounting kit to facilitate Assembly.
Specifications:
Gearing Option |
30:1 |
63:1 |
100:1 |
Peak Power Point |
15N@15mm/s |
30N @ 8mm/s |
40N @ 6mm/s |
Peak Efficiency Point |
8N @ 20mm/s |
12N@12mm/s |
-20N @ 8mm/s |
Max Speed (no load) A |
28mm/s |
15mm/s |
10mm/s |
Max Force (lifted) |
18N |
45N |
50N |
Max Side Load |
5N |
10N |
10N |
Back Drive Force |
9N |
25N |
35N
|
For all gearbox Options:
Stroke |
20 mm |
Input Voltage |
6 oder 12 VDC |
Stall Current |
550mA @ 6V. 210mA at 12V |
Mass |
15g |
Operating Temperature |
-10°C to +50°C |
Positional Repeatability |
‡0,1mm |
Mechanical Backlash |
0,25 mm |
Audible Noise |
55dB @ 45cm |
Ingress Protection |
IP-54 |
Feedback Potentiometer |
5k0+50% |
Limit Switches |
Max. Current Leakage: 8UA
|
Maximum Duty Cycle |
20% |
Downloads:
PQ12 Data Sheet
PQ12 3D Model