Nexus Robot 14128L Left Mecanum Wheel 203 mm – 12 Bearing-Mounted Nylon Rollers

SKU: 22097

Category: Mecanum Wheels

Available immediately
Delivery time: 8 - 9 Workdays (DE - int. shipments may differ)

220,00 €

incl. 19% VAT , (Standard)

Nexus Robot 14128L: left Mecanum wheel with 203 mm diameter, 78 mm width and 12 rollers. Roller material: Nylon. Load capacity: 50 kg per wheel.

Nexus Robot 14128L – Left Mecanum Wheel 203 mm

The Nexus Robot 14128L is a left Mecanum wheel with a 203 mm diameter. The wheel has a width of 78 mm and 12 rollers. Wheel body: Aluminum alloy. Roller material: Nylon.

Applications for the 14128L

The 14128 series combines aluminum bodies with nylon rollers. These 203 mm wheels are described for robots, transport platforms and industrial conveying tasks involving lateral positioning.

Autonomous robots and vehicles
Transport platforms and conveyor Technology
Industrial applications
Precision movement in storage and logistics Systems

Suitability for a specific project depends on the load, floor surface, drive, control system and mechanical design.

Version and chassis arrangement – 14128L

The 14128L is the left-hand version. When selecting an individual wheel, its left-hand roller arrangement must match the intended mounting position. Lateral, diagonal and rotational platform movement requires correctly arranged wheels and coordinated drives.

Materials and dimensions of the 14128L

Wheel body: Aluminum alloy. Roller material: Nylon. The 78 mm width and specified weight of 1.6 kg are included in the table below for installation planning.

Technical Specifications – Nexus Robot 14128L

Manufacturer / Brand	Nexus Robot
Manufacturer Part Number / MPN	14128L
noDNA Part Number / SKU	22097
Version	Left Mecanum Wheel
Diameter	8 inch (203 mm)
Width	78 mm
Number of rollers	12
Number of plates	2
Housing material	Aluminum alloy
Roller material	Nylon
Material of the spacers	Aluminum
Length of roller	67 mm
Net weight	1.6 kg
Load capacity	50 kg per wheel
Roller mounting	Bearing-mounted rollers

Load capacity note: The specification 50 kg per wheel must be used with its stated basis. Do not derive a higher platform load by simply multiplying this figure; load distribution, center of gravity and driving maneuvers must be considered in the design.

Mounting and mechanical connection of the 14128L

Before installing the 14128L, check the wheel interface, shaft diameter, fasteners, bearing arrangement and clearance for the rollers. Select the hub or coupling from the actual interface and technical drawing. Wheel diameter alone does not establish compatibility with a particular accessory hub.

To integrate the Nexus Robot 14128L, plan the wheel, hub or coupling and motor shaft as one mechanical connection. The specified 78 mm wheel width needs to be considered alongside the position of the motor in the frame. Use the mounting interface and available technical files to establish how the wheel is secured and how much space remains between the wheel body, frame and drive.

The rollers need clearance around the entire wheel circumference. Allow space for screw heads, brackets and side covers, and consider wheel position, ground clearance and support of the drive. Matching the shaft bore is only one part of selecting the connection: the hub interface and fasteners must also suit the wheel. When replacing a wheel on an existing chassis, compare the removed component before reusing its motor or bracket.

14128L for robotics, AGV, AMR and mobile Mecanum platforms

With a specified size of 8 inch (203 mm), the Nexus 14128L can be considered for a mobile robot or transport platform design. A Mecanum chassis may suit AGV, AMR or driverless transport concepts where sideways movement and controlled alignment are required. These movements depend on the correct wheel arrangement and coordinated drives.

In research and teaching, a suitably assembled robot can serve as a test platform for vehicle kinematics, navigation and control. Mechanical wheel selection and drive control are considered together: where is each wheel positioned, how is each motor controlled, and how much space is available in the frame? Prototype chassis planning provides an opportunity to address these questions before assembly.

For intralogistics or automated material handling, the 14128L version needs to suit the load and floor surface. Its Nylon roller material, dimensions and stated capacity provide the product-specific basis for selection. Consider the vehicle weight and intended payload. When modifying an existing robot, also compare the mounting interface and the other wheels against the revised build.

Selecting the 14128L individual wheel for a chassis

The 14128L is the left-hand version of this series. When ordering a replacement, compare the model number, roller arrangement and position on the vehicle. An individual wheel does not produce omnidirectional platform movement on its own. For a new build, the remaining wheels, motor connections and control system need to work together. Compare related versions or sets using their own specifications before making a selection.

Related products and further versions for 14128L

Nexus Robot 14128 – set of four wheels. Compare the model specifications and interface for the intended wheel position.
Nexus Robot 14128R – right-hand individual wheel. Compare the model specifications and interface for the intended wheel position.
Mecanum wheels at noDNA – select further sizes, roller materials and versions using their specifications.

Product type:	Mecanum Wheel
Shipping weight:	1,90 kg

technical drawing

STP-Files

There are no reviews yet.

Manufacturer

wortek GmbH

Rankinestr. 4

86899 Landsberg am Lech

Germany

info@wortek.de