Nexus Robot 14138R Right Mecanum Wheel 203 mm – 12 Bearing-Mounted Nylon Rollers

SKU: 22102

Category: Mecanum Wheels

Available immediately
Delivery time: 8 - 9 Workdays (DE - int. shipments may differ)

260,00 €

incl. 19% VAT , (Standard)

Nexus Robot 14138R: right Mecanum wheel with 203 mm diameter, 78 mm width and 12 rollers. Roller material: Nylon. Load capacity: >50 kg per wheel.

Nexus Robot 14138R – Right Mecanum Wheel 203 mm

The Nexus Robot 14138R is a right Mecanum wheel with a 203 mm diameter. The wheel has a width of 78 mm and 12 rollers. Wheel body: Stainless steel. Roller material: Nylon.

Applications for the 14138R

The 14138 series combines nylon rollers, stainless steel and aluminum spacers. Its listed applications include industrial transport platforms, automation and stage equipment.

Suitability for a specific project depends on the load, floor surface, drive, control system and mechanical design.

Version and chassis arrangement – 14138R

The 14138R is the right-hand version. When adding or replacing a wheel, check its right-hand roller arrangement against the dimensions and layout of the existing chassis. Lateral, diagonal and rotational platform movement requires correctly arranged wheels and coordinated drives.

Materials and dimensions of the 14138R

Wheel body: Stainless steel. Roller material: Nylon. The 78 mm width and specified weight of 2.4 kg are included in the table below for installation planning.

Technical Specifications – Nexus Robot 14138R

Manufacturer / Brand	Nexus Robot
Manufacturer Part Number / MPN	14138R
noDNA Part Number / SKU	22102
Version	Right Mecanum Wheel
Diameter	203 mm (8 inch)
Width	78 mm
Number of rollers per wheel	12
Number of plates per wheel	2
Body material	Stainless steel
Roller material	Nylon
Spacer material	Aluminum
Length of roller	67 mm
Net weight	2.4 kg
Load capacity	>50 kg per wheel
Roller mounting	Bearing-mounted rollers

Load capacity note: The specification >50 kg per wheel must be used with its stated basis. Do not derive a higher platform load by simply multiplying this figure; load distribution, center of gravity and driving maneuvers must be considered in the design.

Mounting and mechanical connection of the 14138R

Before installing the 14138R, check the wheel interface, shaft diameter, fasteners, bearing arrangement and clearance for the rollers. Select the hub or coupling from the actual interface and technical drawing. Wheel diameter alone does not establish compatibility with a particular accessory hub.

To integrate the Nexus Robot 14138R, plan the wheel, hub or coupling and motor shaft as one mechanical connection. The specified 78 mm wheel width needs to be considered alongside the position of the motor in the frame. Use the mounting interface and available technical files to establish how the wheel is secured and how much space remains between the wheel body, frame and drive.

The rollers need clearance around the entire wheel circumference. Allow space for screw heads, brackets and side covers, and consider wheel position, ground clearance and support of the drive. Matching the shaft bore is only one part of selecting the connection: the hub interface and fasteners must also suit the wheel. When replacing a wheel on an existing chassis, compare the removed component before reusing its motor or bracket.

14138R for AGV, AMR, driverless transport and industrial platforms

The Nexus Robot 14138R can be considered when designing a mobile industrial or transport platform, provided its specifications suit the intended task. In AGV, AMR and driverless transport concepts, lateral positioning may be useful when aligning a platform at a transfer point. The chassis, drives and controller need to be designed together to achieve the required movement.

The 203 mm (8 inch) diameter and Nylon roller material identify this wheel version. For warehouse, workshop or automated material handling applications, the load of the complete vehicle also matters. Include the frame, motors, battery, mounted equipment and transported goods. Use the capacity on the exact basis stated in the table; a capacity quoted for a set is not an individual-wheel rating.

For movable work platforms or stage installations, select 14138R for the actual chassis design. Unequal wheel loads, center of gravity and driving maneuvers can affect that design. Assess the roller material, running surface and mounting connection together with the intended use. The application descriptions provide selection context; the complete system still needs to be assessed for its task.

Selecting the 14138R individual wheel for a chassis

The 14138R is the right-hand version of this series. When ordering a replacement, compare the model number, roller arrangement and position on the vehicle. An individual wheel does not produce omnidirectional platform movement on its own. For a new build, the remaining wheels, motor connections and control system need to work together. Compare related versions or sets using their own specifications before making a selection.

Technical Files

Related products and further versions for 14138R

Nexus Robot 14138L – left-hand individual wheel. Compare the model specifications and interface for the intended wheel position.
Nexus Robot 14138 – set of four wheels. Compare the model specifications and interface for the intended wheel position.
Mecanum wheels at noDNA – select further sizes, roller materials and versions using their specifications.

Product type:	Mecanum Wheel
Shipping weight:	2,60 kg

Technische Zeichnung

STP-Dateien

There are no reviews yet.

Manufacturer

wortek GmbH

Rankinestr. 4

86899 Landsberg am Lech

Germany

info@wortek.de