Nexus Robot 14159L Left Mecanum Wheel 60 mm – 8 PP+PE Rollers (Basic)

SKU: 22112

Category: Mecanum Wheels

Available immediately
Delivery time: 8 - 9 Workdays (DE - int. shipments may differ)

33,00 €

incl. 19% VAT , plus (DPD)

Nexus Robot 14159L: left Mecanum wheel with 60 mm diameter, 31 mm width and 8 rollers. Roller material: PP+PE. Load capacity: 3 kg per wheel.

Nexus Robot 14159L – Left Mecanum Wheel 60 mm

The Nexus Robot 14159L is a left Mecanum wheel with a 60 mm diameter. The wheel has a width of 31 mm and 8 rollers. Wheel body: Aluminum alloy. Roller material: PP+PE.

Applications for the 14159L

The LEGO-compatible 14159 series is intended for small robots, educational projects and compact experimental builds. For a LEGO or Arduino project, check the hub connection and available mounting space before selecting the drive components.

Robotics projects for education and Research
Compact automation Solutions
Prototyping and creative projects

Suitability for a specific project depends on the load, floor surface, drive, control system and mechanical design.

Version and chassis arrangement – 14159L

The 14159L is the left-hand version. When selecting an individual wheel, its left-hand roller arrangement must match the intended mounting position. Lateral, diagonal and rotational platform movement requires correctly arranged wheels and coordinated drives.

Materials and dimensions of the 14159L

Wheel body: Aluminum alloy. Roller material: PP+PE. The 31 mm width and specified weight of 86 g are included in the table below for installation planning.

Technical Specifications – Nexus Robot 14159L

Manufacturer / Brand	Nexus Robot
Manufacturer Part Number / MPN	14159L
noDNA Part Number / SKU	22112
Version	Left Mecanum Wheel
Diameter	60 mm
Width	31 mm
Number of rollers	8
Number of plates	2
Housing material	Aluminum alloy
Roller material	PP+PE
Length of rollers	30 mm
Net weight	86 g
Load capacity	3 kg per wheel
Series	Basic

Load capacity note: The specification 3 kg per wheel must be used with its stated basis. Do not derive a higher platform load by simply multiplying this figure; load distribution, center of gravity and driving maneuvers must be considered in the design.

Mounting and mechanical connection of the 14159L

Before installing the 14159L, check the wheel interface, shaft diameter, fasteners, bearing arrangement and clearance for the rollers. Select the hub or coupling from the actual interface and technical drawing. Wheel diameter alone does not establish compatibility with a particular accessory hub.

To integrate the Nexus Robot 14159L, plan the wheel, hub or coupling and motor shaft as one mechanical connection. The specified 31 mm wheel width needs to be considered alongside the position of the motor in the frame. Use the mounting interface and available technical files to establish how the wheel is secured and how much space remains between the wheel body, frame and drive.

The rollers need clearance around the entire wheel circumference. Allow space for screw heads, brackets and side covers, and consider wheel position, ground clearance and support of the drive. Matching the shaft bore is only one part of selecting the connection: the hub interface and fasteners must also suit the wheel. When replacing a wheel on an existing chassis, compare the removed component before reusing its motor or bracket.

14159L for LEGO robotics, education and mobile test platforms

The LEGO-compatible Nexus 14159L can support a small mobile robot build when its wheels and drives suit the chosen structure. An educational project can combine wheel selection with planning the frame, motors and controller. The specified 60 mm size provides a basis for assessing mounting space; the connection to the actual hub still needs a separate check.

In robotics teaching, workshops and development projects, a suitably assembled Mecanum chassis can demonstrate different movement patterns. Forward travel, sideways movement and rotation can be explored through individual drive control. Wheel positions and rotation directions need to be coordinated for this type of test platform. LEGO compatibility of the wheel does not establish compatibility with every motor and hub combination.

For a prototype using 14159L, consider the complete robot weight as well as the available mounting space. Include the frame, drives, electronics and additional equipment. The stated load capacity and PP+PE roller material remain the relevant product properties for selection. Assess their suitability for the intended floor surface as part of the complete build.

Selecting the 14159L individual wheel for a chassis

The 14159L is the left-hand version of this series. When ordering a replacement, compare the model number, roller arrangement and position on the vehicle. An individual wheel does not produce omnidirectional platform movement on its own. For a new build, the remaining wheels, motor connections and control system need to work together. Compare related versions or sets using their own specifications before making a selection.

Related products and further versions for 14159L

Nexus Robot 14159 – set of four wheels. Compare the model specifications and interface for the intended wheel position.
Nexus Robot 14159R – right-hand individual wheel. Compare the model specifications and interface for the intended wheel position.
Mecanum wheels at noDNA – select further sizes, roller materials and versions using their specifications.

Product type:	Mecanum Wheel
Shipping weight:	0,20 kg

Technical drawings on demand

There are no reviews yet.

Manufacturer

wortek GmbH

Rankinestr. 4

86899 Landsberg am Lech

Germany

info@wortek.de