| Item information | Value |
|---|---|
| Category: | Mecanum Wheels |
| Product type: | Mecanum Wheel |
| Shipping weight: | 0,70 kg |
Nexus Robot 14198R – Right Mecanum Wheel 127 mm
The Nexus Robot 14198R is a right Mecanum wheel with a 127 mm diameter. The wheel has a width of 51 mm and 12 rollers. Wheel body: Aluminum alloy. Roller material: Polyurethane.
Applications for the 14198R
The 14198 series combines polyurethane rollers, aluminum bodies and aluminum spacers. These specified materials provide a basis for selecting components for autonomous platforms, conveying systems and robotics projects.
- Robotics Projects
- Autonomous platforms
- Conveyor Technology
- DIY robots
Suitability for a specific project depends on the load, floor surface, drive, control system and mechanical design.
Version and chassis arrangement – 14198R
The 14198R is the right-hand version. When adding or replacing a wheel, check its right-hand roller arrangement against the dimensions and layout of the existing chassis. Lateral, diagonal and rotational platform movement requires correctly arranged wheels and coordinated drives.
Materials and dimensions of the 14198R
Wheel body: Aluminum alloy. Roller material: Polyurethane. The 51 mm width and specified weight of 500 g are included in the table below for installation planning.
Technical Specifications – Nexus Robot 14198R
| Manufacturer / Brand | Nexus Robot |
|---|---|
| Manufacturer Part Number / MPN | 14198R |
| noDNA Part Number / SKU | 22083 |
| Version | Right Mecanum Wheel |
| Diameter | 127 mm (5 inches) |
| Width | 51 mm |
| Number of rollers | 12 |
| Number of plates | 2 |
| Housing material | Aluminum alloy |
| Roller material | Polyurethane |
| Material of the spacer | Aluminum |
| Net weight | 500 g |
| Load capacity | 15 kg per wheel |
| Series | Basic |
Load capacity note: The specification 15 kg per wheel must be used with its stated basis. Do not derive a higher platform load by simply multiplying this figure; load distribution, center of gravity and driving maneuvers must be considered in the design.
Mounting and mechanical connection of the 14198R
Before installing the 14198R, check the wheel interface, shaft diameter, fasteners, bearing arrangement and clearance for the rollers. Select the hub or coupling from the actual interface and technical drawing. Wheel diameter alone does not establish compatibility with a particular accessory hub.
For the 14198R, Nexus lists key hubs including 18024 (8 mm), 18025 (10 mm) and 18026 (16 mm). Select the hub to match the shaft and mounting arrangement.
To integrate the Nexus Robot 14198R, plan the wheel, hub or coupling and motor shaft as one mechanical connection. The specified 51 mm wheel width needs to be considered alongside the position of the motor in the frame. Use the mounting interface and available technical files to establish how the wheel is secured and how much space remains between the wheel body, frame and drive.
The rollers need clearance around the entire wheel circumference. Allow space for screw heads, brackets and side covers, and consider wheel position, ground clearance and support of the drive. Matching the shaft bore is only one part of selecting the connection: the hub interface and fasteners must also suit the wheel. When replacing a wheel on an existing chassis, compare the removed component before reusing its motor or bracket.
14198R for robotics, AGV, AMR and mobile Mecanum platforms
With a specified size of 127 mm (5 inches), the Nexus 14198R can be considered for a mobile robot or transport platform design. A Mecanum chassis may suit AGV, AMR or driverless transport concepts where sideways movement and controlled alignment are required. These movements depend on the correct wheel arrangement and coordinated drives.
In research and teaching, a suitably assembled robot can serve as a test platform for vehicle kinematics, navigation and control. Mechanical wheel selection and drive control are considered together: where is each wheel positioned, how is each motor controlled, and how much space is available in the frame? Prototype chassis planning provides an opportunity to address these questions before assembly.
For intralogistics or automated material handling, the 14198R version needs to suit the load and floor surface. Its Polyurethane roller material, dimensions and stated capacity provide the product-specific basis for selection. Consider the vehicle weight and intended payload. When modifying an existing robot, also compare the mounting interface and the other wheels against the revised build.
Selecting the 14198R individual wheel for a chassis
The 14198R is the right-hand version of this series. When ordering a replacement, compare the model number, roller arrangement and position on the vehicle. An individual wheel does not produce omnidirectional platform movement on its own. For a new build, the remaining wheels, motor connections and control system need to work together. Compare related versions or sets using their own specifications before making a selection.
Related products and further versions for 14198R
- Nexus Robot 14198L – left-hand individual wheel. Compare the model specifications and interface for the intended wheel position.
- Nexus Robot 14198 – set of four wheels. Compare the model specifications and interface for the intended wheel position.
- Mecanum wheels at noDNA – select further sizes, roller materials and versions using their specifications.
wortek GmbH, Rankinestr. 4, 86899 Landsberg am Lech, Deutschland, info@wortek.de
Do you need a larger quantity?
We will prepare an individual quotation for your requirements – quickly, directly and personally.
-
Larger quantities
Ask about individual terms for your requirements.
-
Individual quotations
Tailored to your project.
-
Discuss delivery dates
Let us know your preferred delivery date.
-
Personal advice
Support with choosing your components.
Request an individual quotation
Send us your required quantity and, if applicable, your preferred delivery date. We will get back to you shortly with a suitable quotation.
Opens your email application with the item and quantity. You can add details before sending.Our sales team will review your enquiry and get back to you with a suitable quotation.
Please contact us about framework agreements and individual terms.
info@nodna.de