Phidgets 3328_0 42STH38-1684B stepper motor bipolar 1.8 degrees - 1.68A stepper motor - 51:1 gearbox

SKU: 22592
GTIN: 4251326841884
Category: Motors & Controls
Manufacturers: Phidgets

This bipolar stepper motor with a rear shaft and planetary gear has a step angle of 0.035° and a torque of 48 kg-cm at low speeds.

90,38 €

incl. 19% VAT , plus

Available immediately
Delivery time: 8 - 9 Workdays (Other countries)

Request your personal offer!

Description

Phidgets 3328_0 Stepper Motor

This NEMA-17 motor has an integrated planetary gearhead with a 50⁴³⁹⁷/₄₉₁₃:1 ratio. The rear shaft is exposed, so you can mount an encoder or shaft coupling.

At the output of the gearbox, the step angle is approximately 0.035°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gear reduction ratio.

At 1.7 amps, this stepper motor can produce a maximum torque of 180 kg-cm. However, the gearhead is only rated for a continuous torque of 48 kg-cm. If you load this geared stepper motor beyond the rated torque of the gearbox, its useful life will be shortened.

Connection:

This motor must be controlled by a constant current or chopper drive controller.

Warning:

Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor, make sure it is connected to a constant current/chopper drive controller.

Specifications:

Motor Properties	Motor Type	Bipolar Stepper
	Manufacturer Part Number	42STH38-1684B / 36JXS60K51
	Step Angle	0.035°
	Step Accuracy	± 5 %
	Holding Torque	48 kg·cm
	Rated Torque	48 kg·cm
	Maximum Motor Speed	20 RPM
Electrical Properties	Recommended Voltage	24 V DC
	Rated Current	1.7 A
	Coil Resistance	1.7 Ω
	Phase Inductance	3.2 mH
Physical Properties	Shaft Diameter	8 mm
	Rear Shaft Diameter	3.9 mm
	Mounting Plate Size	NEMA - 17
	Weight	564 g
	Number of Leads	4
	Wire Length	300 mm
Gearbox Properties	Gearbox Type	Planetary
	Gear Ratio	50 ⁄4913 : 1
	Backlash Error	1 1⁄2°
	Maximum Strength of Gears	48 kg·cm
	Shaft Maximum Axial Load	49.1 N
	Shaft Maximum Radial Load	98.1 N

Downloads:

Mechanical Drawing 3328_0

Shipping weight:	0,80 kg
Item weight:	0,60 kg