Phidgets DCC1000_0 DC Motor Phidget

SKU: 23183

Category: Motors & Controls

Available immediately
Delivery time: 8 - 9 Workdays (DE - int. shipments may differ)

147,56 €

incl. 19% VAT , (DPD)

Control a brushed high current DC motor with this powerful phidget. The encoder input and analog input provide precise control of motor speed and position.

Description
Reviews

Phidgets DCC1000_0 DC Motor Phidget

The DC Motor Phidget allows you to control a single DC motor (up to 25 A) or a DC linear drive. It uses high frequency pulse width modulation to achieve smooth operation. This phidget connects to your computer via a VINT hub.

Features:

Controls speed and acceleration -Forward and backward.
Specified target position (requires an encoder)
monitoring of electric current -detection of motor standstill
Connection of potentiometers and other ratiometric sensors -Integration of position feedback without the need for a separate input board
Encoder input - Read the quadrature signal from an encoder attached to the motor shaft. This allows you to create a closed loop position controller.
Temperature monitoring - Your program can respond to changes in controller temperature.

Technical details:

Current control - Limit motor torque.
Isolation - The VINT connection of this device is isolated, which increases reliability and avoids ground loops.
Polarity protection - The unit will not turn on or be damaged if the power supply is connected backwards
Overcurrent protection - Built-in fuse to protect the controller in the event of an overcurrent condition
Failsafe protection - Set the unit to turn off automatically when your program stops responding.

Specifications:

Board Properties	Controlled By	VINT
Voltage Sensor	Number of Voltage Inputs	1
	Sampling Interval Min	500 ms/sample
	Sampling Interval Max	60 s/sample
	VoltageRatio Input Resolution	0.00026
	Input Voltage Min (DC)	0 V DC
	Input Voltage Max (DC)	5 V DC
	Measurement Error Max	0.5 %
	Sensor Input Impedance	324 kΩ
Controller Properties	Motor Type	DC Motor
	Number of Motor Ports	1
	Velocity Resolution	0.001 Duty Cycle
	Acceleration Resolution	1 % Duty Cycle/s
	Acceleration Min	0.5 % Duty Cycle/s
	Acceleration Max	10000 % Duty Cycle/s
	Acceleration Time Min	20 ms
	Acceleration Time Max	20 s
	PWM Frequency	25 kHz
	Sampling Interval Min	50 ms/sample
	Sampling Interval Max	60 s/sample
	Current Limit Resolution	17.9 mA
Electrical Properties	Continuous Motor Current Max	25 A
	Supply Voltage Min	8 V DC
	Supply Voltage Max	30 V DC
	Current Consumption (Unconfigured)	(VINT Port) 500 μA
	Current Consumption Max	(VINT Port) 2 mA
	Power Consumption (Unconfigured)	288 mW
	Power Consumption	motor power plus 700 mW
	Replacement Fuse	20A Slow Blow Blade Type, Regular or Micro
Encoder Interface	Number of Encoder Inputs	1
	Encoder Interface Resolution	x4
	Count Rate Max	400000 pulses/s
	Time Resolution	1 μs
	Sampling Interval Min	50 ms/sample
	Sampling Interval Max	60 s/sample
	Encoder Input Low Voltage Max	800 mV DC
	Encoder Input High Voltage Min	2 V DC
Temperature Sensor	Temperature Resolution	0.04 °C
Physical Properties	Recommended Wire Size	10 - 26 AWG
	Operating Temperature Min	-40 °C
	Operating Temperature Max	85 °C