Phidgets DCM4108_0 Brushless Motor with 15:1 Gearbox 57DMWH75 NEMA23
The DCM4108 is a 24 volt brushless DC motor, generating 37 Kg-cm of torque at 250 RPM. The shaft is equipped with a 4mm key to improve coupling.
Brushless DC motors provide convenient position and velocity control through the use of their built in hall-effect sensor. They run quieter and last longer than their brushed counterparts. The 15:1 planetary gearbox on this motor results in higher torque at the cost of speed.
The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor Operation.
Connection: This motor must be controlled by a brushless DC motor controller that has the capability to both send control signals to the three motor wires, and also read the hall-effect feedback from the other five wires.
Comes packaged with: This motor comes with a 5-Pin molex connector soldered to the hall effect wires, and ferrules crimped onto the motor wires so it can quickly and easily be connected to the Brushless DC Motor Phidget.
- Motor Type: Brushless DC Motor
- Number of Poles: 4
- Manufacturer Part Number: 56JXE300K(15)/57DMWH75-2440
- Output Power (Mechanical): 115 W
- Rated Torque: 37.7 kg·cm
- Rated Speed: 250 RPM
- Rated Current: 7 A
- Rated Voltage: 24 V DC
- Coil Resistance: 370 mΩ
- Shaft Diameter: 12 mm
- Mounting Plate Size: 23
- Operating Temperature Min: -20 °C
- Operating Temperature Max: 40 °C
- Gearbox Type: Planetary Gearbox
- Gear Ratio: 15 3/10: 1
Mechanical Drawing DCM4108_0