Phidgets Micro Load Cell (0-100g) - CZL639HD - 3139_0
A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific type of force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification. Fortunately, Phidget Bridge Interfaces will perform all the amplification and measurement of the electrical Output.
Load cells are designed to measure force in one direction. They will often measure force in other directions, but the sensor sensitivity will be different, since parts of the load cell operating under compression are now in tension, and vice versa.
This Single Point Load Cell is often used in small, high-precision scales. It’s mounted by bolting down the end of the load cell where the wires are attached, and applying force on the other end. Where the force is applied is not critical, as this load cell measures a shearing effect on the beam, not the bending of the beam. If you mount a small platform on the load cell, as would be done in a small scale, this load cell provides accurate readings regardless of the position of the load on the platform.
Connection:
Load cells require a power source and produce a very small voltage differential when under strain. In order to read this signal, an amplifier or a board with a high-precision analog-to-digital converter is required.
Warning: Make sure to calibrate your load cell before using it.
Compatibility:
Load cells and strain gauges produce a very tiny voltage differential and must be read by a high-resolution analog-to-digital converter.
The following bridge interfaces can be used with this load cell:
- 1046_0B controlled by USB (Mini-USB) (Number of Bridge Inputs: 4)
- DAQ1500_0 controlled by VINT (Number of Bridge Inputs: 2)
Product Specifications:
Sensor Properties:
- Sensor Type: Shear Load Cell
- Controlled By: Bridge Input
- Weight Capacity Max: 100 g
- Maximum Overload: 120 g
- Cell Repeatability Error Max: ± 50 mg
- Cell Non-Linearity Max: 50 mg
- Cell Hysteresis Max: 50 mg
Electrical Properties:
- Rated Output: 600 μV/V
- Rated Output Error Max: ± 150 μV/V
- Output Impedance: 1 kΩ
- Creep: 100 mg/hr
- Temperature Effect on Zero: 5 mg/°C
- Temperature Effect on Span: 5 mg/°C
- Supply Voltage Min: 3 V DC
- Supply Voltage Max: 10 V DC
- Zero Balance Ratio: ± 100 μV/V
Physical Properties:
- Operating Temperature Min: -10 °C
- Operating Temperature Max: 40 °C
- Compensated Temperature Min: -10 °C
- Compensated Temperature Max: 60 °C
- Cable Length: 110 mm
- Cable Gauge: 4x 30 AWG
- Material: Aluminium Alloy (LY12CZ)
- Screw Thread Size: 2.5M
- Weight: 3.2 g
Downloads:
Mechanical Drawings 3139_0
Download 3D Step File 3139_0
