Phidgets SSR Relay Board 0.5A 3054_0
For new systems and projects, we recommend using the following VINT product instead of this one:
- Solid State Relay Phidget REL2103_0
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion. By simply providing a small voltage to the control side of the circuit, you can open or close a higher powered circuit on the load side.
The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of an LED paired with a set of optically-controlled MOSFETs provides protection from output to input. An on-board diode across the relay output protects the board from static electricity and surges from inductive loads.
Connection
This SSR board can be controlled with a 5V digital output. For more details, see under Connection & Compatibility.
Connection & Compatibility
InterfaceKits and Hubs
This relay board is controlled by a 5V digital output. Just connect the '+' terminal to the digital output and the 'G' terminal to the ground on your device using a bit of wire.
| |
Digital Outputs |
Board Properties |
| Part Number |
Number of Digital Outputs |
Digital Output Current Max |
Digital Output Voltage Max |
Controlled By |
| 1010_0 |
8 |
16 mA |
5 V DC |
— |
| 1011_0 |
2 |
16 mA |
5 V DC |
— |
| 1018_2B |
8 |
16 mA |
5 V DC |
— |
| 1018_3B |
8 |
50 mA |
5 V DC |
— |
| 1019_1B |
8 |
16 mA |
5 V DC |
— |
| 1203_2B |
8 |
16 mA |
5 V DC |
USB (Mini-USB) |
| OUT1100_0 |
4 |
16 mA |
5 V DC |
VINT |
Enclosures
You can protect your board from dust and debris by purchasing an enclosure. An enclosure will also prevent unintentional shorts caused by objects touching the pins on the bottom of the board or any terminal screws.
| |
Physical Properties |
| Part Number |
Material |
| 3821_2 |
Clear Acrylic |
Product Specifications
Board
- Controlled By: Digital Output (5V)
Electrical Properties
- Relay Output Type: MOSFET
- Isolation Method: Photoelectric
- Dielectric Strength: 1.5 kV AC
- Control Voltage Min: 3 V DC
- Control Voltage Max: 30 V DC
- Control Current: 10 mA
- Load Voltage Max (DC): 40 V DC
- Load Voltage Max (AC): 28 V AC
- Load Current Max (AC): 500 mA
- Load Current Max (DC): 500 mA
- Turn-on Time Max: 5 ms
- Turn-off Time Max: 0.2 ms
- Contact Resistance Max: 850 mΩ
Physical Properties
- Recommended Wire Size (Load): 16 - 26 AWG
- Recommended Wire Size (Control): 16 - 26 AWG
- Operating Temperature Min: -40 °C
- Operating Temperature Max: 85 °C
Downloads:
Mechanical Drawing 3054_0
3D Step File 3054_0
Other Relays:
Have a look at other relay boards:
| |
Electrical Properties |
| Part Number |
Load Current Max (AC) |
Load Voltage Max (AC) |
Load Current Max (DC) |
Load Voltage Max (DC) |
| 1012_2B |
— |
— |
— |
— |
| 1014_2B |
12:00 AM |
277 V AC |
7:00 AM |
* 30 V DC |
| 1017_1B |
2:00 AM |
250 V AC |
2:00 AM |
* 120 V DC |
| 3051_1B |
12:00 AM |
277 V AC |
7:00 AM |
* 30 V DC |
| 3052_1 |
2.5 A |
28 V AC |
2.5 A |
40 V DC |
| 3053_0 |
(per channel) 9 A |
28 V AC |
(per channel) 9 A |
40 V DC |
| 3054_0 |
500 mA |
28 V AC |
500 mA |
40 V DC |
| PSU1000_0 |
15 A |
125 V AC |
— |
— |
| REL1000_0 |
12:00 AM |
277 V AC |
7:00 AM |
* 30 V DC |
| REL1100_0 |
— |
— |
8:00 AM |
30 V DC |
| REL1101_1 |
— |
— |
8:00 AM |
30 V DC |
| REL2001_0 |
12:00 AM |
277 V AC |
7:00 AM |
* 30 V DC |
| REL2002_0 |
2:00 AM |
240 V AC |
2:00 AM |
120 V DC |
| REL2103_0 |
10:00 AM |
30 V AC |
* 10 A |
30 V DC |
