Phidgets ENC1000_0 Quadrature Encoder Phidget

Phidgets ENC1000_0 Quadrature Encoder Phidget

SKU: 23152
Category: Boards
Manufacturers: Phidgets

Interface a quadrature encoder at speeds of up to 100,000 quadrature cycles per second to a port on your VINT Hub.

26,18 €

incl. 19% VAT , plus

Available immediately
Delivery time: 8 - 9 Workdays (Other countries)

Request your personal offer!

Description

Phidgets ENC1000_0 Quadrature Encoder Phidget

The quadrature encoder phidget can be connected to any 5V quadrature encoder. A quadrature encoder is the most commonly used feedback device for a DC or stepper motor. With an encoder, you can track how far your motor has rotated, which then allows you to control the position and speed in your code. This phidget connects to your computer via a VINT hub.

Features:

Functions with all 0-5V quadrature encoders -Reads incremental encoders with line driver, open collector or push-pull output circuits.
Reads at speeds up to 100,000 quadrature cycles per second
Power Saving Options - Power off your encoder through your program when the device is not rotating. When the encoder is not powered, this card draws 20μA of current.

Spezifikationen:

Board Properties	Controlled By	VINT
Encoder Interface	Number of Encoder Inputs	1
	Count Rate Max	400000 pulses/s
	Encoder Interface Resolution	x4
	Time Resolution	1 μs
	Encoder Input Low Voltage Max	2.4 V DC
	Encoder Input High Voltage Min	2.6 V DC
	Sampling Interval Min	20 ms/sample
	Sampling Interval Max	1 s/sample
	Pull-up Resistance (Open Collector)	2.2 k? or 10 k?
	Pull-down Resistance (Line Driver)	2.2 k? or 10 k?
Electrical Properties	Current Consumption Min	(unconfigured) 24.6 μA
	Current Consumption Max	encoder current + 4.2 mA
Physical Properties	Operating Temperature Min	-40 °C
	Operating Temperature Max	85 °C

Downloads:

Mechanical Drawing Phidgets ENC1000_0
3D Step File Phidgets ENC1000_0

Shipping weight:	0,20 kg
Item weight:	0,02 kg