Phidgets 1137_0 Differential Air Pressure Sensor ±7 kPa
The 1137 Differential Pressure Sensor is a dual ported air pressure sensor that measures the pressure difference between the two ports. It can measure both positive and negative pressure from –7 kPa to +7 kPa.
Comes packaged with:
- 3002 – 60cm Phidget Cable
Warning
This sensor is designed to measure the pressure of clean, non-condensing air. Contact with moist air (i.e, human breath), dusty air, or other gases can damage the sensor.
Connection and Compatibility
Interface Boards and Hubs
This sensor can be read by any Phidget with an Analog Input or VINT Hub port. It will connect to either one using the included Phidget cable. VINT Hub ports can behave just like Analog Inputs, but have the added flexibility of being able to be used as digital inputs, digital outputs, or ports to communicate with VINT devices.
| |
Voltage Inputs |
| Part Number |
Number of Voltage Inputs |
Voltage Input Resolution |
| 1010_0 |
8 |
10 bit |
| 1011_0 |
2 |
10 bit |
| 1018_2B |
8 |
10 bit |
| 1018_3B |
8 |
— |
| 1019_1B |
8 |
10 bit |
| 1203_2B |
8 |
10 bit |
| DAQ1000_0 |
8 |
12 bit |
| HUB0001_0 |
6 (Shared) |
* 16 bit |
| HUB5000_0 |
6 (Shared) |
* 16 bit |
| SBC3003_0 |
6 (Shared) |
* 16 bit |
Phidget Cables
This sensor comes with its own Phidget cable to connect it to an InterfaceKit or Hub, but if you need extras we have a full list down below. You can solder multiple cables together in order to make even longer Phidget cables, but you should be aware of the effects of having long wires in your system.
| |
Physical Properties |
| Part Number |
Cable Length |
| 3002_0 |
600 mm |
| 3003_0 |
100 mm |
| 3004_0 |
3.5 m |
| 3038_0 |
1.2 m |
| 3039_0 |
1.8 m |
| CBL4104_0 |
300 mm |
| CBL4105_0 |
900 mm |
| CBL4106_0 |
1.5 m |
Product Specifications
Sensor Properties
- Sensor Type: Gas Pressure (Differential)
- Controlled By: VoltageRatio Input
- Sensor Output Type: Ratiometric
- Pressure Differential Min: -7 kPa
- Pressure Differential Max: 7 kPa
- Case Pressure Max: 75 kPa
- Pressure Resolution: 17 Pa
- Measurement Error Max: ± 5 %
- Warm-up Time: 20 ms
- Response Time Max: 1 ms
Electrical Properties
- Supply Voltage Min: 4.8 V DC
- Supply Voltage Max: 5.3 V DC
- Current Consumption Max: 10 mA
- Output Impedance: 1 kΩ
- Output Voltage Min: 500 mV DC
- Output Voltage Max: 4.5 V DC
Physical Properties
- Operating Temperature Min: -40 °C
- Operating Temperature Max: 125 °C
- Recommended Tubing Size: 3⁄32″
Downloads:
Mechanical Drawing 1137_0
3D Step File 1137_0
Other Pressure Sensors:
Here's a list of other gas pressure sensors:
| |
Sensor Properties |
| Part Number |
Sensor Type |
Pressure Min |
Pressure Max |
Pressure Differential Min |
Pressure Differential Max |
Pressure Resolution |
| 1126_1B |
Gas Pressure (Differential) |
— |
— |
-25 kPa |
25 kPa |
55 Pa |
| 1136_0 |
Gas Pressure (Differential) |
— |
— |
-2 kPa |
2 kPa |
5 Pa |
| 1137_0 |
Gas Pressure (Differential) |
— |
— |
-7 kPa |
7 kPa |
17 Pa |
| 1138_0 |
Gas Pressure (Differential) |
— |
— |
0 Pa |
50 kPa |
56 Pa |
| 1140_1B |
Gas Pressure (Absolute) |
20 kPa |
400 kPa |
— |
— |
413 Pa |
| 1141_0 |
Gas Pressure (Absolute) |
15 kPa |
115 kPa |
— |
— |
111 Pa |
| 1141_1B |
Gas Pressure (Absolute) |
15 kPa |
115 kPa |
— |
— |
111 Pa |
| PRE1000_0 |
Gas Pressure (Absolute) |
50 kPa |
110 kPa |
— |
— |
250 mPa |
